The Digitrax Power Xtender 6 - Pin Sound Module (compatible with all scales, Part # 245 - PX1086) is a great addition to your model train setup. It's designed for use with Digitrax decoders equipped with a 6 - pin function harness. An 8 - ohm 10x18 mm oval speaker comes included. This module keeps your locomotives running smoothly even when there are power interruptions due to dirty or bad track. It has a 0.33 F capacitance and can be used on 10 - 18V track power. The hold - up time depends on the actual decoder load and track conditions. It's suitable for Digitrax 1 Amp Series 6 decoders and features a plug - and - play installation with no CV configuration needed. The PX108 series power extender offers similar features to other Digitrax power extenders. It comes in a shorter package, providing about 70% of the hold - up of the larger PX112. It also operates at a wider voltage range, from 10v to 18v. Excluding the harness, it measures 1.007” x 0.492” x 0.299” (25.6mm x 12.5mm x 7.6mm).

Using this Digitrax Power Xtender 6 - Pin Sound Module is easy. First, make sure your Digitrax decoder has a 6 - pin function harness. Then, simply plug the module in - no CV configuration is required. It's as simple as that! When it comes to power, you can use it on track power ranging from 10V to 18V. Remember, the hold - up time during power interruptions can vary depending on the decoder load and the condition of your track. For maintenance, keep an eye on the track. Dirty or bad track can cause power issues, so clean your track regularly. Also, check the connections of the module to ensure they are secure. If you notice any problems with the sound or the locomotive's performance during power interruptions, double - check the installation and the power supply.