The Athearn Genesis ATHG71840 is a remarkable HO scale model of the GP38-2 locomotive from the Milwaukee Road, specifically numbered #350. It comes equipped with DCC and the Sound Tsunami2 system. The MILW version features new solid front and rear handrails, a 1,700-gallon fuel tank, beacons, all-weather cab windows, cab vents, and front and rear snow plows. In the 1970s, the Milwaukee Road replaced its aging low-horsepower switching fleet. They first bought a group of GP38-2s (#350 - 355) in 1973 without dynamic brakes, and another group in 1974 with dynamic brakes. This model #350 has a non-dynamic brake hatch and a beacon. The GP38-2 series offers operating class lights and number boards. The Genesis diesel locomotive features coupler cut levers, MU hoses, see-through cab windows, a full cab interior, and more. It's DCC-ready with Quick Plug™ technology and a 21-pin NEM connector. The sound-equipped models have an onboard DCC decoder with SoundTraxx Tsunami2 sound, dual cube speakers, and can operate in both DC and DCC. The GP38-2 prototype, with its 16-cylinder, 2000-horsepower engine, has been in service for over 40 years in various roles. Product specs include 6 axles, LED lighting, EMD as the prototype manufacturer, and HO scale.

Using your Athearn Genesis GP38-2 locomotive is easy. First, make sure your track is clean and properly connected. If you're using DCC, connect your locomotive to the DCC system following the provided instructions. For DC operation, just connect the power supply to the track. The locomotive comes fully assembled and ready to run, so you can start it up right away. When operating, be aware of the minimum recommended radius of 22 inches for smooth running. For maintenance, regularly clean the wheels and electrical contacts to ensure good current flow. You can use a soft brush to clean the exterior and a contact cleaner for the electrical parts. Keep the locomotive in its original packaging when not in use to protect it from dust and damage. If you want to change the sound settings or other functions, refer to the CV chart included in the box and make changes via the Configuration Value (CV) as needed.