The ESU LokSound Ver 5 DCC Micro with wires is a top - notch product designed for HO scale models. It's 'Generic' and ready for programming. Part number is 397 - 58823. If you want the sound file pre - loaded, just add the sound file number or locomotive type in the 'add order note' of your order. Yankeedabbler will do it for free. Otherwise, you'll need to program the decoder yourself. You can check the ESU Sound Library for North American and AUS files at https://projects.esu.eu/projectoverviews/18. We can load any ESU sound file on request. You can also buy a LokProgrammer (stock number 53452) from us, though it's not always necessary as some decoders come with pre - loaded sound files and CV changes can be made via control systems. The NEW LokSound Select Micro decoder is super small, measuring only 0.98 inch x.417 inch (25mm x 10.6mm x 3.8mm). It's a 4 - output function decoder and is shipped with an 8 - pin NEM 652 connector, allowing for flexible installation. It doesn't need heat sinks due to its unique thermal design. We offer high - power 4 - Ohm speakers for LokSound Select decoders. The LokSound Select works on both conventional analog and DCC layouts, but DCC operation is recommended to enjoy all its features. It follows NMRA DCC standards, supports various speed steps and addressing, and up to 29 function keys. It can switch between DC and DCC operation on the fly. It supports all DCC - programming modes, including POM, and can be programmed on the programming track of popular DCC systems without extra boosters. Using the LokSound Programmer with your computer makes programming even easier. The LokSound Select has a 32 MBit memory chip with high - quality, digitally re - mastered sound recordings. It offers unique sound features like multiple whistles and horns, a fast - responding whistle function, 8 - channel sound playback, synchronized brake squeal, manual notching, and individual volume control. Steam and diesel decoders can produce over 20 sound effects each. You can customize the engine sounds in two ways: by using one CV or by downloading new sounds with the LokSound Programmer. The LokSound Select has superior motor control with load compensation and auto - detection, ensuring smooth locomotive operation. Its Micro version has 4 function outputs with 180mA constant current, assignable individually, and two non - amplified logic - level outputs. It provides a wide range of lighting effects and a dimmable headlight that can be controlled automatically or manually. All function outputs and the motor connection are protected against overload and short - circuit. The decoder is firmware - updatable with an ESU LokSound Programmer and a PC.

Using the ESU LokSound Ver 5 DCC Micro is easy. First, if you want the sound file pre - loaded, add the relevant details in the 'add order note' when you place your order. If not, you'll have to program it yourself. You can check the ESU Sound Library online to find the right sound for your locomotive. You may also buy a LokProgrammer to make programming more convenient, but it's not a must. When installing the LokSound Select Micro decoder, take advantage of the 8 - pin NEM 652 connector for flexible placement. The decoder doesn't need a heat sink, so you don't have to worry about that. For operation, the LokSound Select can work on both analog and DCC layouts. But for the best experience, use DCC. You can switch between DC and DCC on the go. Programming can be done on the main track or the programming track of popular DCC systems. Use the LokSound Programmer with your computer to adjust the settings easily. Regarding sound customization, you can quickly change the prime mover sound, whistle, or horn using one CV. If you're not satisfied, download new sounds with the programmer. The decoder has great motor control that automatically adjusts to different motors, ensuring a smooth run. For lighting, assign the 4 function outputs as you like and control the dimmable headlight manually or automatically. Always keep in mind that all function outputs and the motor connection are protected. To keep your decoder in good shape, avoid overloading it and short - circuits. And if there are firmware updates in the future, use an ESU LokSound Programmer and a PC to update the decoder.